• banner

How to change an inner tube on a mobility scooter

Mobility scooters are a valuable tool for individuals with limited mobility, providing them with the freedom and independence to move with ease. However, like any other mode of transportation, mobility scooters can encounter problems such as flat tires. Knowing how to change the inner tubes on your mobility scooter can save time and money and ensure your mobility scooter stays in good working order. In this article, we will discuss the step-by-step process of replacing an electric scooter inner tube.

Cargo Tricycle For Tourism Use

Before you start changing your inner tube, it’s important to gather the necessary tools and materials. You will need a set of tire levers, a new inner tube that matches the tire size of your scooter, a pump and a wrench. Once you have these items ready, you can continue with the following steps:

Find a suitable work area: Start by finding a flat and stable work surface. This will provide a safe and secure environment for mission execution.

Turn off the scooter: Before working on the scooter, make sure it is turned off and the key is removed from the ignition. This will prevent any unexpected movement of the scooter during repairs.

Remove the wheel: Use a wrench to carefully loosen the nuts or bolts that secure the wheel to the scooter. Once the nuts are loosened, gently lift the wheel off the axle and set it aside.

Release the air from the tire: Using a small tool or the tip of a tire lever, press the valve stem in the center of the wheel to release any remaining air from the tire.

Remove the tire from the wheel: Insert a tire lever between the tire and rim. Use the lever to pry the tire away from the rim, working around the entire circumference of the wheel until the tire is completely free.

Remove the old inner tube: After removing the tire, carefully pull the old inner tube from the inside of the tire. Note the location of the stem as you will need to mate it with the new inner tube.

Inspect Tires and Wheels: With the inner tube removed, take the opportunity to inspect the inside of the tires and wheels for any signs of damage or debris that could cause a flat tire. Remove any foreign matter and make sure the tires are in good condition.

Install the new inner pipe: First insert the valve stem of the new inner pipe into the valve hole on the wheel. Carefully tuck the rest of the tube into the tire, making sure it is evenly positioned and not twisted.

Reinstall the tire onto the wheel: Starting at the valve stem, use a tire lever to carefully install the tire back onto the rim. Be careful to avoid getting the new tube between the tire and rim.

Inflate the tire: With the tire securely attached to the wheel, use a pump to inflate the tire to the recommended pressure shown on the sidewall of the tire.

Reinstall the wheel: Place the wheel back on the scooter’s axle and tighten the nut or bolt with a wrench. Make sure the wheels are securely attached to the scooter.

Test the scooter: After completing the inner tube replacement, open the scooter and take a short test drive to ensure that the tires are functioning properly.

By following the steps below, you can successfully replace the inner tube on your mobility scooter and restore its functionality. It’s important to remember that proper maintenance and regular inspections of your scooter tires can help prevent flat tires and other problems. Furthermore, if you face any difficulty or uncertainty during the process, it is recommended to seek help from a professional technician or a mobility scooter service provider.

All in all, knowing how to change an inner tube on a mobility scooter is a valuable skill that can help scooter users maintain their independence and mobility. With the right tools and a clear understanding of the process, individuals can confidently resolve flat tire issues and keep their scooters in good working order.


Post time: Apr-29-2024