1. Communication failure. 2. Mode conflict. 3. The internal machine code overlaps. 4. The power supply of the external machine is faulty. 5. The air conditioner crashes. 6. The signal line of the internal and external machine is broken or leaking. 7. The indoor circuit board is broken.
1. What is the pedal driving capacity of the electric scooter?
In the case of electric scooters without electric power assist, the pedal travel distance of half an hour of the pedal travel function should not be less than 7 kilometers.
2. What is the mileage of the electric scooter?
The mileage of an electric scooter is generally determined by the battery it is equipped with. The 24V10AH battery pack generally has a mileage of 25-30 kilometers, and the 36V10Ah battery pack has a general mileage of 40–50 kilometers.
3. What is the maximum driving noise of the electric scooter?
The electric scooter runs at a constant speed at the highest speed, and its noise is generally not greater than 62db(A).
4. What is the power consumption of the electric scooter?
When an electric scooter rides electric, its 100km power consumption is generally around 1kw.h.
5. How to judge the power of the battery?
ach electric scooter is connected with a battery power indicator light, and according to the indicator light, the battery power can be judged. Note: The smaller the depth of discharge of the battery each time, the longer the service life of the battery, so no matter how large the capacity of the battery pack is, you must develop a good habit of charging it as you use it. the
6. Where is the position to adjust the riser safety line?
When adjusting the height of the handlebar, pay attention that the seat pipe safety line should not be exposed outside the front fork lock nut.
7. Where is the adjustment position of the saddle tube safety line?
When adjusting the height of the saddle, pay attention that the safety line of the saddle tube should not protrude from the rear joint of the frame.
8. How to adjust the brake of the electric scooter?
The front and rear brakes should be operated flexibly, and can be quickly reset with the help of spring force. After the brake is applied, there should be a finger distance between the brake handle and the handlebar sleeve. The left and right deviations are consistent.
9. How to check whether the brake power-off device is intact?
Hold up the bracket, turn on the switch, turn the right turn handle, start the motor, and then lightly hold the left brake handle, the motor should be able to cut off the power immediately and gradually stop rotating. If the motor cannot be powered off at this time, stop the drive and ask professionals to repair it before using it.
10. What aspects should be paid attention to when inflating the front and rear wheels?
Inflation method: After inflating to a certain air pressure, turn the rim and tap the tire evenly with your hands, and then continue to inflate to make the tire match the rim, so as to avoid tire slippage when riding.
11. What is the recommended torque for key component fasteners?
The recommended torque of the cross tube, stem tube, saddle, saddle tube and front wheel is 18N.m, and the recommended torque of the rear wheel is 3ON.m
12. What is the motor power of the electric scooter?
The electric afterburner rate selected for electric scooters is between 140–18OW, generally not more than 24OW. 12.
13. Which parts of the circuit and connectors need to be checked?
Before leaving the car, check the electrical plug of the battery box, whether the polarity seat is shaken, whether the electric door lock is flexible, whether the battery box is locked, whether the horn and light buttons are effective, and whether the light bulb is in good condition.
4. What is the standard for saddle height adjustment?
The saddle height adjustment of the electric scooter is based on the fact that the rider’s feet can touch the ground to ensure safety.
15. Can the electric scooter carry objects?
The design load of the electric scooter is 75kg, so the weight of the rider should be removed, and heavy objects should be avoided. When carrying a load, use the pedals to assist.
16. When should the switch of the electric scooter be opened?
In order to ensure safety, please open the switch of the electric scooter when getting on the scooter, and close the switch in time when parking or pushing, so as to prevent unintentional rotation of the handle, causing the vehicle to start suddenly and causing accidents.
17. Why do electric scooters with zero-start function need to pedal when starting?
Electric scooters with zero-start function, due to the large current when starting at rest, consume more energy, and are easy to damage the battery, in order to prolong the mileage of one charge and the service life of the battery, it is better to use the pedal when starting.
Post time: Nov-15-2022