When using an electric elderly car, first adjust the height of the saddle and handlebar to the safest and most comfortable position, especially the height of the saddle. It is best to have both feet on the ground at the same time when you need to stop during riding. Test whether the braking device is effective and reliable, and test whether the power supply is cut off and the motor stops working after braking.
Check battery. When the power is turned on, it is especially important to watch the power status on the display, especially when it is used after a long period of storage. In addition, it is also necessary to check whether the relevant driving safety components such as electric horns and lights are effective! Check the rotating parts, whether the front and rear wheels and pedals, crank, sprocket, chain, and flywheel are running normally, and whether there is any foreign matter.
Check if the tire pressure is correct. When riding, you must first obey the road traffic rules. Never cross a red light, ride in the slow lane, never in the fast lane. When the traffic is crowded, turn off the switch and ride manually. Slow down when turning, and avoid turning sharply at a small angle when driving at high speed, which may cause a car accident due to excessive centrifugal force.
Due to the small battery capacity and low motor power of electric elderly vehicles, the load capacity of general electric bicycles is about 80kg (including riders). Reduce the service life of battery motor, and also violate the regulation of traffic law.
When riding uphill, on bridges, or against strong winds, electricity and manpower should be used at the same time to reduce the load on batteries and motors. Riding method when starting: Generally, electric bicycles have a zero-start function, that is, open the switch when stationary, and turn the speed control handle to start the car. However, the starting current at this time is two to three times that of normal driving, which has a great impact on the motor and battery, especially the battery. Therefore, in order to prolong the continuous mileage of one charge and the service life of the battery, the pedal should be started first when starting, and the circuit should be connected after the pedal has reached a certain speed for three or four laps, especially in heavy traffic, traffic lights, etc. Lots of places are especially important. Frequent zero starts will definitely shorten the service life of the battery.
Post time: Mar-15-2023